BQNFK - TURBINOL T-46
- MSDS: BQNFK
- Manufacturer: BP OIL CO RESIDUAL FUEL SALES
- Product Name: TURBINOL T-46
- National Stock Number: 9150-00-966-8833
Product Identification
Product ID:TURBINOL T-46
MSDS Date:01/20/1989
FSC:9150
NIIN:00-966-8833
MSDS Number: BQNFK
Responsible Party
CLEVELAND, OH 44114-2375
US
Emergency Phone: 216-586-4219
Info Phone: 216-586-4219
Cage: MO398
Contractor
Telephone: 216-586-4219
Cage: MO398
Ingredients
PETROLEUM OIL
CAS: 64741-89-5
RTECS: PY8041500
Fraction By Weight: 0-60%
REFINED HEAVY PARAFFINIC DISTILLATES
CAS: 64741-88-4
Fraction By Weight: 40-99%
OSHA PEL 5 MG/M3 (OIL MIST)
ACGIH TLV: 5 MG/M3 (OIL MIST)
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION-ASPIRATION INTO LUNGS MAY
CAUSE PNEUMONITIS. MAY CAUSE GASTROINTESTINAL DISTURBANCES.
SKIN-REPEATED CONTACT MAY RESULT IN DEFATTING, OIL ACNE.
EYE-SLIGHTLY IRRITATING. INHALATION-MAY CAUSE R ESPIRATORY TRACT
IRRITATION. EXPOSURE TO HIGH CONCENTRATIONS OF DENSE OIL MIST MAY
LEAD TO PNEUMONIA.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:INGESTION-IRRITATION, NAUSEA, VOMITING &
DIARRHEA. SKIN-REDNESS, ITCHING, INFLAMMATION, CRACKING & POSSIBLY
SECONDARY INFECTION. THERMAL BURNS IF HEATED. HIGH PRESSURE
INJECTIONS MAY BECOME SWOLLEN, D ISCOLORED & EXTREMELY PAINFUL.
EYE-CONTACT WITH HEATED MATERIAL MAY CAUSE THERMAL BURNS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INGESTION-INDUCE VOMITING. IF SPONTANEOUS, MONITOR FOR
BRAETHING DIFFICULTY. GET MEDICAL ATTENTION. SKIN-REMOVE
CONTAMINATED CLOTHING. WASH AREA WITH SOAP & WATER. GET MEDICAL
ATTENTION. EYE-FLUSH WIT H LARGE AMOUNTS OF WATER. GET MEDICAL
ATTENTION. THERMAL BURNS REQUIRE IMMEDIATE ATTENTION.
INHALATION-REMOVE FROM SOURCE OF EXPOSURE. GET MEDICAL ATTENTION IF
IRRITATION PERSISTS.
Fire Fighting
Flash Point Method:COC
Flash Point:399F,204C
Autoignition Temp:Autoignition Temp Text:ND
Lower Limits:ND
Upper Limits:ND
Extinguishing Media:USE WATER SPRAY, DRY CHEMICAL, FOAM OR CARBON
DIOXIDE TO EXTINGUISH FIRE.
Fire Fighting Procedures:WATER/FOAM MAY CAUSE FROTHING, WITH FURTHER
APPLICATION LEADING TO BOILOVER. USE WATER SPRAY TO COOL
FIRE-EXPOSED CONTAINERS, FLUSH SPILLS. DO NOT PUT IN SEWER.
Unusual Fire/Explosion Hazard:COMBUSTIBLE AT HIGH TEMPERATURES. EXPOSED
FIREFIGHTERS SHOULD WEAR MSHA/NIOSH APPROVED SELF-CONTAINED
BREATHING APPARATUS WITH FULL FACE MASK/PROTECTIVE EQUIPMT
Accidental Release
Spill Release Procedures:STOP LEAK IF YOU CAN DO IT WITHOUT RISK. SMALL
SPILL: TAKE UP WITH SAND OR OTHER NONCOMBUSTIBLE ABSORBENT MATERIAL
OR OTHER SORBENT KNOWN TO BE COMPATIBLE, THEN FLUSH AREA WITH
WATER. LARGE SPILL: DIK E FAR AHEAD OF SPILL FOR LATER DISPOSAL.
Handling
Handling and Storage Precautions:AVOID EXTREMES OF TEMPERATURES IN
STORAGE. STORE IN TIGHTLY CLOSED CONTAINERS IN COOL, DRY, ISOLATED,
WELL-VENTILATED AREA AWAY FROM HEAT/INCOMPATIBLE
Other Precautions:EMPTY CONTAINERS MAY CONTAIN FLAMMABLE/COMBUSTIBLE OR
EXPLOSIVE RESIDUE OR VAPORS. DO NOT CUT, GRIND, DRILL, WELD OR
REUSE CONTAINERS UNLESS ADEQUATE VENTILATION PRECAUTIONS ARE TAKEN
AGAINST THESE HA ZARDS.
Exposure Controls
Respiratory Protection:IF EXPOSURE LIMITS AREA EXCEEDED OR IF
IRRITATION IS EXPERIENCED, NIOSH APPROVED RESPIRATORY PROTECTION
SHOULD BE WORN. RESPIRATORY PROTECTION MAY BE NEEDED FOR
NON-ROUTINE OR EMERGENCY SITUATIONS.
Ventilation:VENTILATION & OTHER FORMS OF ENGINEERING CONTROLS ARE OFTEN
THE PREFERRED MEANS FOR CONTROLLING CHEMICAL EXPOSURES.
Protective Gloves:CHEMICAL PROTECTIVE GLOVES.
Eye Protection:SAFETY GLASSES OR CHEMICAL GOGGLES.
Other Protective Equipment:DEPENDING ON CONDITIONS OF USE, ADDITIONAL
PROTECTION MAY BE NECESSARY SUCH AS FACE SHIEL, APRON, ARMCOVERS,
ETC.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, DRINKING OR SMOKING. PROVIDE AN EYEWASH STATION IN THE WORK
AREA.
Supplemental Safety and Health
READ PRECAUTIONS ON LABEL BEFORE USE. DO NOT STORE IN UNLABELED
CONTAINERS. DO NOT EAT, DRINK OR SMOKE IN AREAS OF USE OR STOARGE.
Chemical Properties
HCC:V6
Boiling Pt:B.P. Text:>700F,>371C
Melt/Freeze Pt:M.P/F.P Text:ND
Vapor Pres:<.10 MMHG
Vapor Density:HEAVIER
Spec Gravity:0.87
pH:ND
Viscosity:74.9 CST
Evaporation Rate & Reference:<1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR, LIGHT YELLOW TO ORANGE LIQUID W/FAINT
HYDROCARBON ODOR.
Percent Volatiles by Volume:ND
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZERS.
Stability Condition to Avoid:STABLE INDER NORMAL CONDITIONS OF USE.
Hazardous Decomposition Products:COMBUSTION MAY PRODUCE CARBON
MONOXIDE, CARBON DIOXIDE AND REACTIVE HYDROCARBONS.
Disposal
Waste Disposal Methods:THE TRANSPORATION, STORAGE, TREATMENT AND
DISPOSAL OF THIS WASTE MATERIAL MUST BE CONDUCTED IN COMPLIANCE
WITH ALL FEDERAL, STATE AND LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.